SmartFork^® FAQ

Our SmartFork^® are designed and made per your individual request. It is not possible, to rework existing forks into a SmartFork^® .

The SmartFork^® is rated with the capacities according the ITA class they are made for. Compliance with ISO 2330 is ensured at all time (e.g. a safety factor of 3).

Yes, SmartFork^®applications may be installed into almost all special forks. Thus use on attachments, for example multiple pallet clamps, is possible. We will gladly check your particular application!

Yes, in principle the SmartFork^® can be applied in many different environments - though sometimes special adjustments and designs are required. We will gladly check your individual demands (special load carrier, transported goods and environmental conditions). Information on minimum dimensions / structural dimensions for the individual application can be found under scope of delivery.

Yes, spare parts supply of the SmartFork^® comprises an exchange of the base fork as well as an exchange of individual electric componnts. The overall condition / operating hours of the complete SmartFork^® should always be checked during wear examination or exchange of spare parts to take economically sensible decisions. We will be happy to check your request, contact us!

The camera is recessed in the fork tip and additionally protected by a cover plate to protect the lens. We have very good experience with this method and can provide each individual part to be exchanged in case of a damage. The system is designed to have components exchanged plug&play.